• Home
  • How much does a new heat pump and air handler cost?

How much does a new heat pump and air handler cost?

Author of the blog (work in a car repair shop)
Ask Q

How much does a new heat pump and air handler cost?

The average cost to replace a heat pump and air handler is $5,000 to $12,000. Installing new ductwork costs $2,400 to $6,600 more. Installing a new air handler costs $1,500 to $3,400 alone, depending on the capacity and efficiency rating.Cost To Replace Heat Pump And Air Handler The average cost to replace a heat pump and air handler is $5,000 to $12,000. Installing new ductwork costs $2,400 to $6,600 more. Installing a new air handler costs $1,500 to $3,400 alone, depending on the capacity and efficiency rating.

How much is an air handler for a heat pump?

Heat Pump Replacement Cost Most homeowners pay between $3,000 and $6,000 to get a heat pump replaced. If you want to get your air handler replaced with the pump, expect to pay between $4,000 and $9,000. Adding ductwork will push the final cost to $15,000 or more.

Do you have to replace air handler with a heat pump?

Unfortunately, the short answer is yes. You should replace your indoor air handler at the same time as your outdoor heat pump — or air conditioning unit if it's that time of year.

How long does it take to replace a heat pump and air handler?

A full heating, ventilating, and air conditioning (HVAC) system replacement will take around three days to complete, with one day for the changeout and two days for the ductwork.

How much does it cost to install an indoor air handler unit?

Average cost: $3,875 - $10,000. A new heat pump can cost between $3,875 to $7,625 depending on the size of your home, energy efficient ratings, brand name, and the type of heat pump you install. A mini split ductless heat pump with 4 multi zone indoor air handler units could cost up to $10,000 to install.

How much does it cost to install a heat pump?

A heat pump both heats and cools a home, so an AC unit is not needed. Removing the AC unit costs $300 to $500. However, a heat pump costs more to install than air conditioning. The average cost to replace an oil or gas furnace with a heat pump is $4,000 to $12,000.

Should I repair or replace my heat pump and air handler?

If you have had to repair your heat pump and air handler more times than usual in the past few months, consider replacing both systems. If not, they can break down and leave you without any warmth or coolness during extreme temperatures.

What is an air handler on a heat pump?

The air handler has a blower motor, heating elements, and cooling coils. It’s the indoor component of a central air conditioner or heat pump. So, the air handler works with your outdoor unit to provide your space with heating and cooling. The air handler uses a fan to circulate the conditioned air throughout your home.

Below you will find two interesting articles on a similar topic 👇

What is cheaper to run heat pump or gas furnace?

Is central air better than heat pump?

Tired of looking for a video for your question?

Video Answer below 👇

Were our answers helpful?

Yes No

Thanks so much for your feedback!

Have more questions? Submit a request

FAQ for the last Day

  • What will a stuck closed thermostat cause?
  • If the thermostat becomes stuck in the closed position, the circulation of the coolant is blocked so the coolant cannot get to the radiator to be cooled which causes the engine to overheat.Can you drive with thermostat stuck closed? A vehicle can run just fine if the thermostat doesn't open. It will run on the warm side, not past halfway, and heat the interior just fine. But, when the weather gets...


  • Where is a thermostat wired to?
  • The white wire underneath your thermostat connects to your heating system. It terminates at your air handler or furnace. The white wire connects to terminal W in industry-standard thermostats.Where do thermostat wires go? Thermostat Wiring Tips The W wire is connected to your heating system. If your thermostat controls your heat, you will have a white wire. The Y wire is yellow and connects to you...


  • What causes no power to thermostat?
  • A quick fix to restore your thermostat's power is a tripped circuit breaker or blown fuse, depending what you have in your home. Sometimes a surge can cause this issue. If you check your electrical box and a circuit breaker is tripped, just flip it back. If you have fuses, replace the fuse.How does a thermostat lose power? The power is out or a circuit breaker has tripped The power loss could also...


  • What does it mean when your thermostat is blank?
  • If your thermostat is blank, the first thing you should do is check the batteries. Chances are, the batteries have died and the thermostat simply can't power on. Replace the batteries and see if your thermostat turns on.Why did my Honeywell thermostat screen go blank? If you own a Honeywell thermostat, the blank screen could be an indication of a furnace door that wasn't completely closed. These t...


  • What happens if thermostat is wired wrong?
  • Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.If your thermostat’s wires have not been correctly connected then they would cause an electric shock, the circuit might even blow or the thermostat circuit might be damaged. If this happens call a technician...


  • How many wires does a thermostat need?
  • The most basic thermostat has 2 wires; usually a red and a white wire. Two wire thermostat wiring is used for furnaces only and usually doesn't need a “C” or “Common” wire. That's why we only need two wires.How many wires do I need for a heat only thermostat? In the most basic system, this functionality is provided by use of a fan center relay, and the low voltage wiring to the thermostat now will...


  • What does no power to Rc wire mean?
  • This usually happens because the wire isn't properly connected. It might also mean that the wire was incorrectly entered in the app. Check the system wires to make sure they are correctly entered and properly connected. Important: You must turn the system off before checking the system wires.What is RC wire on thermostat? The Rc Wire Rc wires are for air conditioning systems or dual transformer sy...


  • What if there is no C wire for thermostat?
  • You most likely have a line voltage system and none of the popular smart thermostats on the market are available to you as-is. (There is some hope with an adapter, but don't get too excited yet.) This wiring indicates a line voltage system, and you'll need an adapter or a smart thermostat designed for line voltage.What if you don’t have Common Wire Install a new C wire Use a C wire Adapter Choose...


Comments

Leave a Comment

how
Email us