• Home
  • How to replace the blower motor resistor in a car?

How to replace the blower motor resistor in a car?

Author of the blog (work in a car repair shop)
Ask Q

How to replace the blower motor resistor in a car?

The heater blower motor resistor is often found beneath the dashboard. It is located in the heater and air conditioning compartment. It's connected to the air conditioning system, where it can adjust the speed of the blower motor fan. It can also be found behind the glove box of some vehicles.Locate the blower motor resistor on the passenger side under the dash board. Disconnect the electrical connector to the blower motor resistor. Remove the screws or bolts to the blower motor resistor and remove the resistor.

Where is the blower motor resistor located at?

The heater blower motor resistor is often found beneath the dashboard. It is located in the heater and air conditioning compartment. It's connected to the air conditioning system, where it can adjust the speed of the blower motor fan. It can also be found behind the glove box of some vehicles.

How do you remove and replace a blower motor resistor?

Locate the blower motor resistor on the passenger side under the dash board. It is mounted to the the blower housing near the blower motor. Disconnect the electrical connector to the blower motor resistor. Remove the screws or bolts to the blower motor resistor and remove the resistor.

What are the signs of a failing blower motor resistor?

Signs of a Bad Blower Motor Resistor Loss of HVAC fan control (total or certain speeds) The fan only works on its highest speed setting. No air coming from vents. Intermittent or inconsistent fan speed.

Where is the blower motor resistor located at?

The heater blower motor resistor is often found beneath the dashboard. It is located in the heater and air conditioning compartment. It's connected to the air conditioning system, where it can adjust the speed of the blower motor fan. It can also be found behind the glove box of some vehicles.

How do you remove and replace a blower motor resistor?

Locate the blower motor resistor on the passenger side under the dash board. It is mounted to the the blower housing near the blower motor. Disconnect the electrical connector to the blower motor resistor. Remove the screws or bolts to the blower motor resistor and remove the resistor.

What causes a blower motor resistor to burn out?

In most cases, a blower motor resistor fails due to corrosion or overheating. Sometimes, the mechanical resistance to the motor rotation causes an excessive electric current that can overheat and prematurely damage the blower motor resistor.

How much does it cost to replace a blower resistor?

How much does a blower motor resistor cost? To replace the blower motor resistor, it would cost you anywhere between $50 to$150 – this includes the cost of equipment and labor. However, by doing it yourself at home, you can save up to $70.

Is it easy to replace a blower motor resistor?

How to Replace a Blower Motor Resistor. The blower motor resistor is usually extremely easy to access, but the hard part can be positioning your body inside the car to remove the part. The resistor is at the bottom of the HVAC housing or just behind the glove compartment.

Should I replace the blower motor and resistor at same time?

We do suggest that you replace the resistor at the same time. It may not be critical, but this will keep the system more uniform. The issue may even be related to the resistor. If you know that it is not related to the issue, then you do not have to replace it.

How do I test a blower motor resistor?

Place one lead of the Ohmmeter on terminal 1 of the resistor. Place the other lead on terminal 2 and check against specifications. If this circuit is open, showing infinity on the Ohmmeter, the blower resistor must be replaced. Move the lead from terminal 2 to terminal 3 and check this reading against specifications.

Is there a fuse for blower motor?

How long should a blower motor resistor last?

The blower motor resistor is designed to last for the car's lifespan. In most cases, these resistors will wear out long before the car does. Usually, the wear that the blower motor resistor has is due to the constant use that it gets and the heat that it is exposed on a regular basis.

How do you test a blower motor resistor?

Place one lead of the Ohmmeter on terminal 1 of the resistor. Place the other lead on terminal 2 and check against specifications. If this circuit is open, showing infinity on the Ohmmeter, the blower resistor must be replaced. Move the lead from terminal 2 to terminal 3 and check this reading against specifications.

Does the blower motor resistor control heat?

The blower motor resistor is an electrical component that is a part of the vehicle's heating and air conditioning system. It is responsible for controlling the blower motor's fan speed.

Where is the blower motor resistor located at?

The heater blower motor resistor is often found beneath the dashboard. It is located in the heater and air conditioning compartment. It's connected to the air conditioning system, where it can adjust the speed of the blower motor fan. It can also be found behind the glove box of some vehicles.

How do you remove and replace a blower motor resistor?

Locate the blower motor resistor on the passenger side under the dash board. It is mounted to the the blower housing near the blower motor. Disconnect the electrical connector to the blower motor resistor. Remove the screws or bolts to the blower motor resistor and remove the resistor.

How long does it take to replace a blower motor in a car?

How Long Does It Take To Replace A Blower Motor In A Car? It generally takes about 4 hours for an experienced technician to do a blower motor replacement. If you are doing it on your own in your garage with common tools, you can expect the job to take 6 hours or more.

What happens when a blower motor resistor goes bad?

If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed. The heating and air conditioning systems may still function at one speed, however the resistor will have to be replaced in order for full functionality to be restored.

How much does it cost to replace a blower motor in a car?

How can I tell if my blower motor is bad in my car?

You might also hear ongoing whirring noises, or noises that change or get louder if you increase the fan speed. These are all signs of problems with the blower motor. In some cases, you may even notice smoke or smells of burning while driving, in which case you should pull over immediately.

Why is my blower fan not working?

If you see or hear the fan turn on, your blower motor is not the culprit. If the fan does not start, you have a wiring issue (circuit breaker trips) or motor problem (circuit breaker does not trip). While your thermostat may be at fault, only an HVAC technician can diagnose and remedy the issue correctly.

Where is the blower motor relay fuse located?

Under the instrument panel, look under the glove box. On the right side of the fender wall you will find another fuse box. The blower motor fuse is easy to replace.

Can a blower motor resistor be repaired?

The resistor module is easy and inexpensive to replace. It's then typically installed in the ductwork, near the car blower—either under the dash or under the hood. (Refer to a service manual to locate yours.) Purchase a new resistor module at the auto parts store (usually less than $25).

Is there a fuse for blower motor?

How long should a blower motor resistor last?

The blower motor resistor is designed to last for the car's lifespan. In most cases, these resistors will wear out long before the car does. Usually, the wear that the blower motor resistor has is due to the constant use that it gets and the heat that it is exposed on a regular basis.

How do you remove a blower motor resistor?

At this point, you can remove the resistor from the housing. Disengage the wire harness locking tab, and disconnect the wire harness from the blower motor resistor. Put your new resistor in position and connect the wire harness to the blower motor resistor.

When should you replace a blower motor resistor?

If the resistor shows no visual damage, the resistance between terminals must be checked and compared to specifications. If the resistance is out of specs, the resistor must be replaced. For example, in this photo we measured the resistance of this blower motor resistor.

How to replace the blower motor resistor on a Kenmore dryer?

Disengage the wire harness locking tab, and disconnect the wire harness from the blower motor resistor. Put your new resistor in position and connect the wire harness to the blower motor resistor.

Where is the blower motor resistor located on a Ford?

The motor that runs that fan is called a blower motor. Ford blower motor resistor. It's located inside the dash, often on the opposite side of the steering wheel or inside the engine compartment on the firewall. In most modern cars, the speed of the blower motor can be adjusted gradually.

Below you will find two interesting articles on a similar topic 👇

What is a blower motor?

Does blower motor affect engine?

Tired of looking for a video for your question?

Video Answer below 👇

Were our answers helpful?

Yes No

Thanks so much for your feedback!

Have more questions? Submit a request

FAQ for the last Day

  • How long does a car heater blower motor last?
  • For the most part, the heater blower motor on your car is supposed to last as long as the actual vehicle does. Due to the harsh conditions that this blower motor has to operate in, it will usually end up having repair issues. There are a variety of problems that the blower motor may have that will render it useless.How long do heater blower motors last? How often should you replace your blower mo...


  • What is the best service to replace a car heater blower motor?
  • How much does it cost to replace a car's blower motor? How much is the labor to replace a blower motor? Furnace Blower Motor Replacement Cost A single-speed blower motor costs around $450 to replace while a variable-speed motor costs $600 or more. You'll also need to budget labor, about $75 to $125 per hour. It typically takes an HVAC technician 1.5 to 2.5 hours to do the job. Can a car blower mo...


  • How long does it take for heat to work after adding coolant?
  • The heat should be there as soon as your engine gets warm, however long that takes. In an average car (is there such a think), I'd guessedamate that to be in the 3-5 minute range once the vehicle has started moving, or about 10 minutes if it's just idling (this also depends on how cold it is outside ...How long after adding coolant will heater work? How long does it take for coolant to start work...


  • Does coolant affect car heating?
  • The coolant (usually a mixture of water and antifreeze) in your engine doesn't just work to keep the engine from overheating: It's also the source of heat supporting the heating system. If there isn't enough coolant in your system, the heater core will blow cold air into your car.Will adding coolant help heat? Adding coolant does nothing to address the problem that caused your engine to overheat i...


  • Does coolant help with heat?
  • Coolant helps pull heat away from the engine. So, without enough coolant, the engine could overheat or seize up. Continued use of an overheated engine could lead to permanent damage, such as pistons welding to the cylinders.Will adding coolant help heat? Adding coolant does nothing to address the problem that caused your engine to overheat in the first place, but it often allows you to drive safel...


  • How does coolant absorb heat?
  • The cooling system works by constantly passing coolant through channels in the engine block. Coolant, driven by a water pump, is pushed through the cylinder block. As the solution passes through these channels, it absorbs heat from the engine.Where does the coolant absorb most of the heat from the engine? The engine contains internal hollow structures called water jackets. The coolant flows inside...


  • Is it better to use coolant or water?
  • Using water adds contaminants to your radiator system. It's much better for the engine to use water than to drive with low coolant, but you should replace the water with the correct coolant for your vehicle as soon as possible.What happens if I use water instead of coolant? If you were to just use water rather than the coolant mixture, high temperatures inside the motor would easily boil that wate...


  • Why is the heat in my car not very warm?
  • You might ask, “Why is my car heater not getting hot enough?” Common causes are thermostat problems, heater core issues, jammed heater flaps, air bubbles, and low coolant levels. Some of these reasons are partly due to the age of your vehicle, while others are a result of poor vehicle maintenance.If the heater control valve is the culprit, the air coming into your vehicle won’t feel warm. The heat...


Comments

Leave a Comment

<
Email us