• Home
  • What causes a blower motor to fail?

What causes a blower motor to fail?

Author of the blog (work in a car repair shop)
Ask Q

What causes a blower motor to fail?

Blower motor breakdown can be the result of anything from old age to failed bearings, high amp draw, electrical failure in the windings, dirt accumulation, and more. “The most common cause is dirt accumulation due to lack of maintenance,” said Tom Beaulieu, president of Bay Area Services Inc.Some of the most common reasons for failure include old age, failed bearings, dirt accumulation, loss of lubricants, failed run capacitors, and more. That being said, technicians should inspect the blower motor to locate the malfunction.

What can cause a blower motor to stop working?

In most cases, a blower motor resistor fails due to corrosion or overheating. Sometimes, the mechanical resistance to the motor rotation causes an excessive electric current that can overheat and prematurely damage the blower motor resistor.

What causes a blower motor to burn out?

Inadequate air flow within the system. Buildup of dust, dirt, or debris. Electrical problems, including an excessive voltage supply. Motor insulation failing prematurely due to high temperatures.

What happens when a blower motor fails?

If the blower motor resistor fails, the blower motor will still work, but it will be stuck on one speed in most cases. If you remove the resistor completely, the blower motor fan will still work at one speed, in most car models. This is because usually the resistor is not used for the highest speed setting.

What can cause a blower motor to stop working?

In most cases, a blower motor resistor fails due to corrosion or overheating. Sometimes, the mechanical resistance to the motor rotation causes an excessive electric current that can overheat and prematurely damage the blower motor resistor.

What causes a blower motor to burn out?

Inadequate air flow within the system. Buildup of dust, dirt, or debris. Electrical problems, including an excessive voltage supply. Motor insulation failing prematurely due to high temperatures.

How do you tell if it's the blower motor or resistor is bad?

Signs of a Bad Blower Motor Resistor Loss of HVAC fan control (total or certain speeds) The fan only works on its highest speed setting. No air coming from vents. Intermittent or inconsistent fan speed.

How long should a blower motor last?

How much does it cost to replace a blower motor?

Can a blower motor be repaired?

There are a number of things that can go wrong with your heating system, but if the air stops blowing altogether and the same is true on cold air settings, a blower motor replacement is likely in order. The good news is that it's a fairly straight forward repair.

Is there a fuse for blower motor?

How long does it take to replace a blower motor in a car?

How Long Does It Take To Replace A Blower Motor In A Car? It generally takes about 4 hours for an experienced technician to do a blower motor replacement. If you are doing it on your own in your garage with common tools, you can expect the job to take 6 hours or more.

Where is the blower motor reset button?

Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.

Is there a fuse for blower motor?

How much does it cost to replace a blower motor?

What can cause a blower motor to stop working?

In most cases, a blower motor resistor fails due to corrosion or overheating. Sometimes, the mechanical resistance to the motor rotation causes an excessive electric current that can overheat and prematurely damage the blower motor resistor.

What causes a blower motor to burn out?

Inadequate air flow within the system. Buildup of dust, dirt, or debris. Electrical problems, including an excessive voltage supply. Motor insulation failing prematurely due to high temperatures.

What happens when the blower motor resistor goes out?

If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed. The heating and air conditioning systems may still function at one speed, however the resistor will have to be replaced in order for full functionality to be restored.

Can you drive with a bad blower motor?

Should you drive with a bad heater blower motor? A bad heater blower motor will not affect the safety of your car, with the possible exception of you not being able to clear the windshield of snow, ice, or condensation if the defrosters don't work.

Will a blower motor work without the resistor?

Without any power, the motor won't run. As a result, the blower fan stays still and silent, and no air blows out of the vents. There are instances where a bad resistor will prevent the current from reaching the blower motor altogether.

When should I replace my blower motor?

One of the most common indicators that you need to replace your furnace and AC blower motor is that it will become very noisy. Eventually the system will just stop blowing air altogether. Often there will be a buzzing sound indicating that the motor is unable to start and has overheated.

How many blower motors are in a car?

The number of blower motors in your vehicle depends on its climate control system. Some cars have one blower motor, but that may not be the case for some SUVs and vans. They may have two motors, one in the heater box and another in the vehicle's rear area.

How long does it take to replace a AC blower motor?

Furnace Blower Motor Replacement Cost A single-speed blower motor costs around $450 to replace while a variable-speed motor costs $600 or more. You'll also need to budget labor, about $75 to $125 per hour. It typically takes an HVAC technician 1.5 to 2.5 hours to do the job.

Is it hard to replace a blower motor?

The replacement of the blower motor is common and straightforward, so most shops will perform the repair — many on the same day.

Where is a blower motor located?

The blower motor is usually under the dashboard on the passenger side. Blower motors that make loud squeaks or rattling noises may be worn out and on the verge of packing it in, but sometimes those noises are caused by leaves or other debris that can be cleaned out after the motor is removed from the vehicle.

Where is the blower motor relay fuse located?

Under the instrument panel, look under the glove box. On the right side of the fender wall you will find another fuse box. The blower motor fuse is easy to replace.

What causes a blower motor to go bad?

Another reason why a blower motor might go bad is due to rust in the motor’s internal components. Rust in a blower motor is a symptom of a dirty blower motor.

What causes a blower motor relay fuse to blow?

Blown fuses One of the first symptoms of a bad or failing AC blower motor relay is a blown AC blower motor relay circuit fuse. If the blower motor relay develops any sort of problem that hinders its ability to properly limit and distribute power, it may cause the blower motor fuse to blow.

Why won’t my air conditioner blower work?

Lots of times, airflow restriction from a dirty filter will cause a blower motor to overheat. The excess heat in the motor will cause its performance to degrade, and the motor may fail altogether. If your blower has a fan belt, take a loot at it. If the belt is snapped, then the blower won’t work. Replacing the belt is a fairly simple fix.

What are the symptoms of a bad blower motor resistor?

1. Blower motor stuck on one speed A common symptom of a faulty blower motor resistor is a blower motor that is stuck on one setting. The blower motor resistor is the component directly responsible for controlling the blower motor fan speed. If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed.

Below you will find two interesting articles on a similar topic 👇

Why does my AC blower motor relay keep blowing?

Why does my car AC fan only work when I move?

Tired of looking for a video for your question?

Video Answer below 👇

Were our answers helpful?

Yes No

Thanks so much for your feedback!

Have more questions? Submit a request

FAQ for the last Day

  • Can low coolant cause heat not to work?
  • First, check your coolant level to be sure there is enough liquid in there to even get to your heater core. If your radiator is very low on coolant, you'll get no heat. If your levels are okay, you either have a bad water pump or a thermostat that isn't opening.The most common problem when the heat is not working in your car is actually a low coolant level. Luckily, the coolant level is very easy...


  • What is BMW thermostat?
  • A BMW thermostat controls the flow of coolant from your BMW engine through the radiator. During warmup coolant flows, but not into the radiator until proper operating temperature has been reached.What does a thermostat do for a car? Your car's thermostat is a vital component that is actually pretty simple. It's a valve located in your car's cooling system. Its job is to regulate the amount of cool...


  • Does the radiator affect the heater?
  • Furthermore, when the radiator fails, causing the engine to overheat, excessive pressure and temperatures cause the connections on the heater core to break.What happens when the radiator goes bad? As the radiator goes bad, it will turn a rusty or oil color from contaminants. If not flushed periodically, this dirty coolant turns into sludge. By the time it turns to sludge, it will not flow properly...


  • Will a coolant flush unclog a heater core?
  • Flushing a radiator can help reduce the rust that passes through the heater core. The most effective way of unclogging a heater core is by flushing it with a garden hose.Dirt and rust clog up the core and don’t let warm air come out. Hence, you’re stuck with cold air. On the other hand, a coolant flush doesn’t always clear the dirt and debris inside the heater core.Does a coolant flush clean the h...


  • How much does it cost to replace a BMW thermostat?
  • Labor costs are estimated between $178 and $225 while parts are priced between $282 and $297. This range does not include taxes and fees, and does not factor in your specific model year or unique location.How much does a Car Thermostat Replacement cost? On average, the cost for a BMW 330Ci Car Thermostat Replacement is $295 with $143 for parts and $152 for labor. Prices may vary depending on your...


  • How do I know if my BMW thermostat is bad?
  • Here are the signs your car thermostat is failing: The temperature gauge reads high and the engine overheats. The temperature changes erratically. The vehicle's coolant leaks around the thermostat or under the vehicle.How do you tell if your BMW has a bad thermostat? Thermostats fail in one of two ways; they either fail stuck open or fail stuck closed. When they fail in a closed fashion its usuall...


  • How do I know if my thermostat is stuck closed?
  • How to Tell if Your Car's Thermostat Is Stuck Closed Method 1 of 3: Observing the Coolant Flow. Take the cap off of your radiator. ... Method 2 of 3: Measuring the Engine and Hose Temperatures. Start your vehicle to let the engine idle. Move your vehicle outside so exhaust fumes can escape. ... Method 3 of 3: Testing the Thermostat in Hot Water. Drain the coolant from the radiator. ...What happens...


  • Does the heater core affect the AC?
  • Does a bad heater core affect air conditioning? In most cases, the answer is no. The heater relies on hot engine coolant, whereas the air conditioning (A/C) system uses refrigerant. The heater and A/C are, for the most part, two separate systems.The heater core will not cause the A/C to not blow cold. If your A/C is working properly with the correct amount of refrigerant, then you may have a tempe...


Comments

Leave a Comment

how
Email us