• Home
  • What causes a car heater fan to stop working?

What causes a car heater fan to stop working?

Author of the blog (work in a car repair shop)
Ask Q

What causes a car heater fan to stop working?

If little air is coming through the vents (hot or cold), then it could be because the blower motor for the fan or a switch or resistor that controls fan speed isn't working. Another cause might be that the electronically controlled “blend doors” that direct air flow are stuck or broken.The blower motor resistor or blower module gets hot as it powers the fan so, often times, they can burn out causing certain speeds of the fan in your car to stop working, the fan can be stuck on one speed, only work on high speed, or not work on any settings.

Why did the heat in my car suddenly stop working?

A heater can stop working for a number of reasons, including: A low antifreeze/water level in the radiator due to a leak in the cooling system. A bad thermostat that isn't allowing the engine to properly warm up. A blower fan that isn't working properly.

Is there a fuse for heater fan in car?

Many vehicles have two fuses for the blower motor, one in the interior fuse block and the other under the hood. The blower motor is usually under the dashboard on the passenger side.

Will a blown fuse cause my heater not to work?

Faulty Wiring or Blown Fuses Similar to your broken HVAC controls, your car's wiring could be broken or have a short in it. This would mean the heater isn't triggered when the driver commands it to function.

Will a blown fuse cause my heater not to work?

Faulty Wiring or Blown Fuses Similar to your broken HVAC controls, your car's wiring could be broken or have a short in it. This would mean the heater isn't triggered when the driver commands it to function.

How much does it cost to replace a blower motor in a car?

How much does it cost to fix car heater?

The total cost of parts and labor will range between $800 and $1,000 to have your heater core fixed by a professional. Labor costs vary, so call ahead and get a quote from multiple repair shops. If you fix the heater yourself, you'll only have to pay for the cost of a new heater core which runs between $100 and $300.

Where is the fan blower fuse located?

Under the instrument panel, look under the glove box. On the right side of the fender wall you will find another fuse box.

What fuse controls the heat in a car?

The blower fuse is a 40 amp fuse located in the engine compartment's fuse box.

What to do if the heat in your car isn't working?

If the thermostat can't signal to the car that the engine is warm, the coolant won't be sent over to provide heat to your heater core and the air will stay cool. Thermostats are a relatively easy and inexpensive fix, so installing a new one can get your heater working again quickly.

Why is cold air blowing when the heat is on?

When a furnace only blows cold air, there's a chance the heater could have overheated. But don't worry, this usually doesn't mean the unit is broken. When the system overheats, there's a safety feature that shuts the system off. This is a good thing—it could prevent a fire, carbon monoxide leak, or even an explosion.

Can a bad thermostat cause no heat in car?

Thermostat. A faulty thermostat could be behind your car's heater not working. If it isn't opening up to let the coolant flow through it, the core can't produce heat. Thermostats can also get stuck open causing the engine's temperature to stay low.

Will a blown fuse cause my heater not to work?

Faulty Wiring or Blown Fuses Similar to your broken HVAC controls, your car's wiring could be broken or have a short in it. This would mean the heater isn't triggered when the driver commands it to function.

What is the difference between a fan motor and a blower motor?

What Is a Blower Motor? Unlike the condenser fan motor, the blower motor is located indoors. It's the component that blows cool air through the ducts and into different parts of your home. So it's essentially your air mover.

How long does it take to replace a blower motor in a car?

How Long Does It Take To Replace A Blower Motor In A Car? It generally takes about 4 hours for an experienced technician to do a blower motor replacement. If you are doing it on your own in your garage with common tools, you can expect the job to take 6 hours or more.

How long do blower motors last in a car?

The blower is supposed to last the entire lifetime of your car. However, situations vary and some climates require the fan to be used too often. Many car owners find themselves having to replace the blower after five years. The quality of the motor used to power the blower matters.

What fuse is for the heater blower?

Where is the blower motor relay?

The blower motor relay is generally located in the under-hood fuse box or in the under-dash fuse box. A blown fuse can mimic relay failure.

How do I fix my fan heater blowing cold air?

The problem may be as simple as that it's not set hot enough. Check or replace the batteries inside the thermostat. Not all thermostats use batteries, but those that do depend on them to work. Adjust the fan switch; try setting it to auto – it may not be in the heating cycle.

Why has the heating gone in my car?

In most cases, car heater issues fall under two headings: There could be a blockage or other problem stopping heated antifreeze from moving through the heater core component. A valve or switch could be faulty, or the heater core could be a clogged.

How do I know if my thermostat is bad in my car?

Here are the signs your car thermostat is failing: The temperature gauge reads high and the engine overheats. The temperature changes erratically. The vehicle's coolant leaks around the thermostat or under the vehicle.

Does coolant affect the heater?

The coolant (usually a mixture of water and antifreeze) in your engine doesn't just work to keep the engine from overheating: It's also the source of heat supporting the heating system. If there isn't enough coolant in your system, the heater core will blow cold air into your car.

Will a blown fuse cause my heater not to work?

Faulty Wiring or Blown Fuses Similar to your broken HVAC controls, your car's wiring could be broken or have a short in it. This would mean the heater isn't triggered when the driver commands it to function.

How much does it cost for a blower motor?

Furnace Blower Motor Replacement Cost On average nationwide, a furnace blower motor replacement costs $400 to $600, including parts and labor. A single-speed blower motor costs around $450 to replace while a variable-speed motor costs $600 or more.

Does AC and heat use same blower?

Similarly, your home's heating and air conditioning units form another complex system and share critical components. These critical components are your furnace and air conditioner. They often use the same blower to force conditioned air throughout your home.

Does the blower motor resistor control heat?

The blower motor resistor is an electrical component that is a part of the vehicle's heating and air conditioning system. It is responsible for controlling the blower motor's fan speed.

How to fix a car heater fan that is not working?

Get the whole fan circuitry checked for loose wiring problems to rectify the error. Also a faulty alternator could make the blower motor stop working, leading to fan failure, when the blower motor stops is rendered dysfunctional. Hope this article helps you in figuring out the reason behind car heater fan failure.

Why is my car heater not heating up?

The heater fan is responsible for dispersing the air throughout the cabin. Even if every other part of your car’s heating system works properly, you won’t feel any warm air if the fan doesn’t work. A damaged radiator can leak and prevent coolant from reaching the heater core. Without the heater core, your car cannot heat up.

Why is my blower fan not working in my car?

Your HVAC’s blower fan uses a resistor to determine the levels of air blowing into your cabin. If this fails, the blower motor will not work at all, and you’ll be stuck in an ice throne. Almost every part of your car’s electrical system relies on a series of fuses and wiring.

Can a bad radiator fan cause overheating?

Unfortunately, the radiator fan can fail and will cause your car to overheat. What causes the radiator to stop working? The most common reasons a radiator fan is not working are luckily due to a blown fuse, bad relay, or a broken wire. It can also be caused by a faulty coolant temp sensor, low coolant level or the fan itself can be damaged.

Below you will find two interesting articles on a similar topic 👇

How do I know if my radiator fan motor is bad?

What does a broken radiator fan sound like?

Tired of looking for a video for your question?

Video Answer below 👇

Were our answers helpful?

Yes No

Thanks so much for your feedback!

Have more questions? Submit a request

FAQ for the last Day

  • What are blowers used for?
  • Blower is equipment or a device which increases the velocity of air or gas when it is passed through equipped impellers. They are mainly used for flow of air/gas required for exhausting, aspirating, cooling, ventilating, conveying etc. Blower is also commonly known as Centrifugal Fans in industry.Blowers are equipment or devices which increase the velocity of air or gas when passed through equippe...


  • What are the blower applications?
  • Industrial centrifugal fans and blowers accommodate a variety of applications. For example, chemical processing, corrosive gas handling, dust collection, dryers, fume control, process cooling, and process heating.What is an example of blower? Example applications include air brakes in steam locomotives and the opening and closing of automatic doors. Nowadays, blowers and compressors used in variou...


  • What are blowers drugs?
  • a hallucinogenic drug, typically LSD.


  • Is a blower a pump?
  • You might wonder how a pump relates to fans, blowers, and compressors. Well, a pump is a device that works on a liquid instead of a gas, raising the pressure of the liquid. Pumps generally do not have the refined breakdown in pressure ratio (head rise) that fans, blowers, and compressors do for gas applications.Is blower same as compressor? A: The main difference between compressors and blowers is...


  • What is air blower machine?
  • Air blower machine is a simple and effective electrical device used in homes and industries to blow away dust from every nook and corner. For gadgets and electronics have delicate parts that cannot be cleaned with a cloth. This is when you need air blowers to remove dust with its continuous air pressure.Air blower machine is a simple and effective electrical device used in homes and industries to...


  • Which of the following is created by blowers?
  • Which of the following is created by blowers? Explanation: Blowers create air low. The blower system creates pressure through resistance to air flow. By combining the flow rate and back pressure, the actual operating air flow can be identified.What is the purpose of blower? Blowers are equipment or devices which increase the velocity of air or gas when passed through equipped impellers. They are m...


  • What is an industrial blower?
  • Industrial fans and blowers are machines whose primary function is to provide and accommodate a large flow of air or gas to various parts of a building or other structures. This is achieved by rotating a number of blades, connected to a hub and shaft, and driven by a motor or turbine.An industrial blower is an electromechanical device that uses an electric motor, impeller, and airfoils to effectiv...


  • What is the difference between blower and pump?
  • Blowers use twin rotating rotors to displace air inside a tank, while rotary vane pumps compress air to create a void. When the load valve is opened, atmospheric pressure pushes debris up the hose and into the tank. So how do you know if a pump or blower is right for you?What is the difference between blower and centrifugal pump? Any fan that can produce pressures that are greater than 1.2 mg/cm2...


Comments

Leave a Comment

how
Email us