A defective blower motor will make a continuous sound noticeable by the passengers in the vehicle. It can manifest as a knocking, whirring, clunking, vibrating, squealing, or whining noise that persists until the blower motor is replaced.
How do you tell if it's the blower motor or resistor is bad?
Signs of a Bad Blower Motor Resistor Loss of HVAC fan control (total or certain speeds) The fan only works on its highest speed setting. No air coming from vents. Intermittent or inconsistent fan speed.
Why is my blower motor so loud in my car?
Loud noises you hear when your car's heater or air conditioner are on typically indicate a blower motor issue. The good news is that a blower motor problem like this can be the result of something as simple to fix as debris or trash that got caught in it.
Can you drive with a bad blower motor?
Should you drive with a bad heater blower motor? A bad heater blower motor will not affect the safety of your car, with the possible exception of you not being able to clear the windshield of snow, ice, or condensation if the defrosters don't work.
How much should it cost to replace a blower motor?
Replacing a blower motor costs $450 on average with a typical range of $250 to $800. With a warranty, you might pay as little as $150 for labor alone. For high-end models, like those with large motors or access issues, you might pay as much as $2,000.
What will a bad blower motor resistor do?
If you try to increase the air pressure and you feel no difference in the pressure blowing, then your blower motor resistor may be failing. A damaged blower motor resistor will work on one fan speed which may not be enough to keep the inside of your car cool or warm enough.
What happens if blower motor fails?
Power to the blower motor is fed through the blower motor resistor, so if it fails or has any issues power can be cut off to the motor. A blower motor without power will not be able to produce any air pressure, and as a result the heating and air conditioning system will be left with no air coming from the vents.
How long should a car blower motor last?
For the most part, the heater blower motor on your car is supposed to last as long as the actual vehicle does. Due to the harsh conditions that this blower motor has to operate in, it will usually end up having repair issues. There are a variety of problems that the blower motor may have that will render it useless.
When should I replace my blower motor?
If the motor is making rattling, clanking, or banging sounds, it may be because of a loose or broken part. Loud banging sounds are especially worrisome. They're usually a sign that something is damaged or disconnected. And this may mean replacing the blower motor.
Is there a fuse for blower motor?
Do you have to hit blower motor to work?
Blower motor only start working after i hit a bump. In most cases that is a sign of worn down blower motor brushes not making a good contact. In some cases the blower motor/resistor pigtail could cause erratic operation of the blower motor too.
How do I test a blower motor resistor?
Place one lead of the Ohmmeter on terminal 1 of the resistor. Place the other lead on terminal 2 and check against specifications. If this circuit is open, showing infinity on the Ohmmeter, the blower resistor must be replaced. Move the lead from terminal 2 to terminal 3 and check this reading against specifications.
How do you know if a resistor is bad?
A good resistor should test within its rated range. A bad resistor will either show infinite resistance or a measurement far higher than its rated resistance. In either case the resistor is no longer functioning properly.
Is it hard to replace a blower motor?
The replacement of the blower motor is common and straightforward, so most shops will perform the repair — many on the same day.
How long does it take to replace a motor blower?
This is around a 4 hour job by an experienced Tech. At home, by a Novice with decent skills, about 5 hours plus!
Can a bad blower motor cause no heat?
Problems with Your Blower Motor or Blower Motor Resistor Without it, there's no circulation of air—hot, cold, or otherwise. The blower motor resistor is the part that controls the fan speed of the blower motor. Both of these components can fail, resulting in the heating system simply not working.
How many blower motors are in a car?
The number of blower motors in your vehicle depends on its climate control system. Some cars have one blower motor, but that may not be the case for some SUVs and vans. They may have two motors, one in the heater box and another in the vehicle's rear area.
Where is the blower motor fuse located?
Many vehicles have two fuses for the blower motor, one in the interior fuse block and the other under the hood. The blower motor is usually under the dashboard on the passenger side.
Where is the blower motor relay fuse located?
Under the instrument panel, look under the glove box. On the right side of the fender wall you will find another fuse box. The blower motor fuse is easy to replace.
How much does it cost to replace blower motor resistor?
How much does a blower motor resistor cost? To replace the blower motor resistor, it would cost you anywhere between $50 to$150 – this includes the cost of equipment and labor. However, by doing it yourself at home, you can save up to $70.
Should you replace blower motor and resistor at the same time?
We do suggest that you replace the resistor at the same time. It may not be critical, but this will keep the system more uniform. The issue may even be related to the resistor. If you know that it is not related to the issue, then you do not have to replace it.
Is there a fuse for the blower motor resistor?
A fuse is often located on the resistor board. The fuse only protects the low and medium blower speeds. High speed will still work if the resistor fuse is blown.
How much does it cost to replace a blower motor resistor?
How much does a blower motor resistor cost? To replace the blower motor resistor, it would cost you anywhere between $50 to$150 – this includes the cost of equipment and labor. However, by doing it yourself at home, you can save up to $70.
What happens when a resistor fails?
When a resistor breaks down, current typically flows through the burnt resistor without any resistance and thereby passes unchecked. Other components in the circuit may become damaged from the excess current flowing through.
How can you tell if a resistor is open?
Test a Resistor with an Ohmmeter Testing a Resistor with an ohmmeter is the best, easiest and most effective way to tell whether a resistor is good or not. To set up for the check, we take the ohmmeter and place its probes across the leads of the resistor.
How do u test a capacitor?
To test the capacitor with a multimeter, set the meter to read in the high ohms range, somewhere above 10k and 1m ohms. Touch the meter leads to the corresponding leads on the capacitor, red to positive and black to negative. The meter should start at zero and then moving slowly toward infinity.
Below you will find two interesting articles on a similar topic 👇
Can a bad blower motor cause no AC?How long does it take to replace a blower motor resistor?
