If the blower motor relay develops any sort of problem that hinders its ability to properly limit and distribute power, it may cause the blower motor fuse to blow. Any sort of electrical spikes or excessive current from a bad relay will blow the fuse and cut power in order to protect the system.
How do I know if my blower motor relay is bad?
If you have a faulty blower motor, you may experience low airflow from the vents, even when the fan is on high. There will be no air coming from the vents if your fan isn't working due to a bad blower motor resistor. Blown relay circuit fuses or melted relays are more serious signs of a bad blower motor relay.
What does a blower motor relay do?
In a blower motor, the relay supplies the power that allows the fans to circulate warmed air. Essentially an on/off switch, the blower motor relay's reactions start and end the heating process in HVAC systems by controlling the flow of current between the power source and the motor.
How do you test a blower motor relay?
Connect a test light or multimeter to the ground (black lead). Turn the ignition key to the on position (engine off), and remove the relay. Using the probe, test all terminal sockets in the relay connector. Two of the four should have power.
What causes blower motor relay failure?
In most cases, a blower motor resistor fails due to corrosion or overheating. Sometimes, the mechanical resistance to the motor rotation causes an excessive electric current that can overheat and prematurely damage the blower motor resistor.
How do I know if my blower motor relay is bad?
If you have a faulty blower motor, you may experience low airflow from the vents, even when the fan is on high. There will be no air coming from the vents if your fan isn't working due to a bad blower motor resistor. Blown relay circuit fuses or melted relays are more serious signs of a bad blower motor relay.
How do you test a blower motor relay?
Connect a test light or multimeter to the ground (black lead). Turn the ignition key to the on position (engine off), and remove the relay. Using the probe, test all terminal sockets in the relay connector. Two of the four should have power.
How can I tell if a relay is bad?
You want to feel and listen for any clicks. If you feel and hear clicks, the relay works on one side – the side with the energizing circuit and coil. However, if there was no sound from the horn, the relay has a problem along the contact circuit.
What happens when blower motor resistor goes out?
If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed. The heating and air conditioning systems may still function at one speed, however the resistor will have to be replaced in order for full functionality to be restored.
How much does it cost to replace a blower motor relay?
The blower motor is operated by an electrically operated switch, called a relay. If the relay fails, the motor's fans will not blow conditioned air into your car. Fixing the relay usually costs around $50 to $80. So, if the blower motor relay fails, you could be left sweating or shivering.
Is there a fuse that controls the blower motor?
Many vehicles have two fuses for the blower motor, one in the interior fuse block and the other under the hood. The blower motor is usually under the dashboard on the passenger side.
Where is the blower motor relay fuse located?
Under the instrument panel, look under the glove box. On the right side of the fender wall you will find another fuse box. The blower motor fuse is easy to replace.
Will a blower motor work without the resistor?
Without any power, the motor won't run. As a result, the blower fan stays still and silent, and no air blows out of the vents. There are instances where a bad resistor will prevent the current from reaching the blower motor altogether.
Where is the blower motor relay?
The blower motor relay is generally located in the under-hood fuse box or in the under-dash fuse box. A blown fuse can mimic relay failure. A failed blower motor switch can also give many of the same symptoms.
What controls the blower motor on the furnace?
A fan limit switch is a component of a furnace system that determines when the furnace blower assembly for hot air turns on and off. Essentially, this means that it determines when the hot air should be blown through your ventilation system. The fan limit switch also has two other functions.
Where is the blower motor relay fuse located?
Under the instrument panel, look under the glove box. On the right side of the fender wall you will find another fuse box. The blower motor fuse is easy to replace.
Is there a fuse that controls the blower motor?
Many vehicles have two fuses for the blower motor, one in the interior fuse block and the other under the hood. The blower motor is usually under the dashboard on the passenger side.
How do you diagnose a bad blower motor resistor?
A common symptom of a faulty blower motor resistor is a blower motor that is stuck on one setting. The blower motor resistor is the component directly responsible for controlling the blower motor fan speed. If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed.
How do I know if my blower motor relay is bad?
If you have a faulty blower motor, you may experience low airflow from the vents, even when the fan is on high. There will be no air coming from the vents if your fan isn't working due to a bad blower motor resistor. Blown relay circuit fuses or melted relays are more serious signs of a bad blower motor relay.
How do you test a blower motor relay?
Connect a test light or multimeter to the ground (black lead). Turn the ignition key to the on position (engine off), and remove the relay. Using the probe, test all terminal sockets in the relay connector. Two of the four should have power.
What causes blower motor relay failure?
In most cases, a blower motor resistor fails due to corrosion or overheating. Sometimes, the mechanical resistance to the motor rotation causes an excessive electric current that can overheat and prematurely damage the blower motor resistor.
What happens if a relay fails?
If the relay fails it will cut off power to fuel pump and ignition system, which will result in a no power, and therefore no start condition.
What does a bad relay sound like?
If your starter relay has gone bad, the electrical signal will never make it from the battery to the starter motor. As a result, your engine won't turn over - no matter how many times you turn the key. A faulty relay often produces an audible clicking sound when you turn your car.
Can a bad blower motor resistor cause no AC?
No Air Coming From Vents The blower motor resistor controls the power to the system's blower motor. When it fails, it can cut off all power to the motor.
How do I know if I need a blower motor or a resistor?
Signs of a Bad Blower Motor Resistor Loss of HVAC fan control (total or certain speeds) The fan only works on its highest speed setting. No air coming from vents. Intermittent or inconsistent fan speed.
Should you replace blower motor and resistor at the same time?
We do suggest that you replace the resistor at the same time. It may not be critical, but this will keep the system more uniform. The issue may even be related to the resistor. If you know that it is not related to the issue, then you do not have to replace it.
Below you will find two interesting articles on a similar topic 👇
Where is the fuse box on a Dodge Durango?What causes no heat?
