• Home
  • What happens when the blower motor resistor goes out?

What happens when the blower motor resistor goes out?

Author of the blog (work in a car repair shop)
Ask Q

What happens when the blower motor resistor goes out?

If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed. The heating and air conditioning systems may still function at one speed, however the resistor will have to be replaced in order for full functionality to be restored.

How do you know if your blower motor resistor is bad?

Signs of a Bad Blower Motor Resistor Loss of HVAC fan control (total or certain speeds) The fan only works on its highest speed setting. No air coming from vents. Intermittent or inconsistent fan speed.

What happens when blower motor goes bad?

If the blower motor is completely bad, then you'll have no airflow at all. Strange sounds coming from blower. Blower motors can make all kinds of sounds, depending on what the issue is. Vibrations, grinding, and high pitched-noises are some of the sounds a blower can make if it's going bad.

What does blower motor resistor do?

Blower resistors are resistors which are used to control the fan speed of automotive blowers. The fan speed can be changed either by switching the blower resistor resistance mechanically using a rotating lever, or electronically by the air conditioning system.

How do you know if your blower motor resistor is bad?

Signs of a Bad Blower Motor Resistor Loss of HVAC fan control (total or certain speeds) The fan only works on its highest speed setting. No air coming from vents. Intermittent or inconsistent fan speed.

Will a blower motor work without the resistor?

Without any power, the motor won't run. As a result, the blower fan stays still and silent, and no air blows out of the vents. There are instances where a bad resistor will prevent the current from reaching the blower motor altogether.

How do I test a blower motor resistor?

Place one lead of the Ohmmeter on terminal 1 of the resistor. Place the other lead on terminal 2 and check against specifications. If this circuit is open, showing infinity on the Ohmmeter, the blower resistor must be replaced. Move the lead from terminal 2 to terminal 3 and check this reading against specifications.

Is there a fuse for blower motor?

What does a bad blower motor sound like?

A defective blower motor will make a continuous sound noticeable by the passengers in the vehicle. It can manifest as a knocking, whirring, clunking, vibrating, squealing, or whining noise that persists until the blower motor is replaced.

How much does it cost to replace blower motor resistor?

How much does a blower motor resistor cost? To replace the blower motor resistor, it would cost you anywhere between $50 to$150 – this includes the cost of equipment and labor. However, by doing it yourself at home, you can save up to $70.

How long should a blower motor resistor last?

The blower motor resistor is designed to last for the car's lifespan. In most cases, these resistors will wear out long before the car does. Usually, the wear that the blower motor resistor has is due to the constant use that it gets and the heat that it is exposed on a regular basis.

Can you drive with a bad blower motor?

Should you drive with a bad heater blower motor? A bad heater blower motor will not affect the safety of your car, with the possible exception of you not being able to clear the windshield of snow, ice, or condensation if the defrosters don't work.

How much does it cost to replace blower motor in car?

How much does it cost to replace a blower motor?

How do you know if your blower motor resistor is bad?

Signs of a Bad Blower Motor Resistor Loss of HVAC fan control (total or certain speeds) The fan only works on its highest speed setting. No air coming from vents. Intermittent or inconsistent fan speed.

What is the difference between blower motor and blower motor resistor?

The blower motor resistor is responsible for controlling the blower motor speed. In the past, this was done by varying the voltage supplied to the blower motor. In newer applications, the blower motor resistor is actually a solid state module that sends a varied signal to the blower motor.

How do you know if a resistor is bad?

A good resistor should test within its rated range. A bad resistor will either show infinite resistance or a measurement far higher than its rated resistance. In either case the resistor is no longer functioning properly.

Where is the blower resistor located?

The blower motor resistor is usually extremely easy to access, but the hard part can be positioning your body inside the car to remove the part. The resistor is at the bottom of the HVAC housing or just behind the glove compartment.

Why do blower resistors fail?

In most cases, a blower motor resistor fails due to corrosion or overheating. Sometimes, the mechanical resistance to the motor rotation causes an excessive electric current that can overheat and prematurely damage the blower motor resistor.

Can you drive with a bad blower motor?

Should you drive with a bad heater blower motor? A bad heater blower motor will not affect the safety of your car, with the possible exception of you not being able to clear the windshield of snow, ice, or condensation if the defrosters don't work.

How much does it cost to replace a blower motor?

How long do blower motors last in a car?

The blower is supposed to last the entire lifetime of your car. However, situations vary and some climates require the fan to be used too often. Many car owners find themselves having to replace the blower after five years. The quality of the motor used to power the blower matters.

Should you replace blower motor and resistor at the same time?

We do suggest that you replace the resistor at the same time. It may not be critical, but this will keep the system more uniform. The issue may even be related to the resistor. If you know that it is not related to the issue, then you do not have to replace it.

How do you test a resistor?

To test individual resistor values (outside a circuit), connect the multimeter probe wires to the resistor's two terminals—it doesn't matter which way round, as resistors are not directional components. Make sure the multimeter dial is in resistance measuring mode. Then check the value on the multimeter.

How much does it cost to fix a blower motor resistor?

How much does a blower motor resistor cost? To replace the blower motor resistor, it would cost you anywhere between $50 to$150 – this includes the cost of equipment and labor. However, by doing it yourself at home, you can save up to $70.

How long does it take to replace a blower motor resistor?

The average cost to replace the blower motor resistor at a repair shop is between $44 and $55 in parts and $70 in labor costs, for a total cost of around $114 to $125. On the other hand, you can easily fix the blower motor resistor at home in about an hour (even if you're a beginner) and for around $70.

Below you will find two interesting articles on a similar topic 👇

What cause the blower motor to stop working?

What are the two fans in my car?

Tired of looking for a video for your question?

Video Answer below 👇

Were our answers helpful?

Yes No

Thanks so much for your feedback!

Have more questions? Submit a request

FAQ for the last Day

  • Where is the blower motor capacitor?
  • It's common for HVAC blower unit fan motors to use a start/run capacitor. Those will be located in the blower cabinet, often right on the blower motor itself.Where is a capacitor located? What is a capacitor? A capacitor is a device that is designed to store energy and provide it to your air conditioner during every cooling cycle. Capacitors are located near the motors for your system's compressor...


  • How much does it cost for a blower motor?
  • Furnace Blower Motor Replacement Cost On average nationwide, a furnace blower motor replacement costs $400 to $600, including parts and labor. A single-speed blower motor costs around $450 to replace while a variable-speed motor costs $600 or more. You'll also need to budget labor, about $75 to $125 per hour.How much does it cost to fix a blower motor in car? What happens when your blower motor g...


  • Why is my AC fan blower motor not working?
  • First make sure there is power to the indoor unit and that a switch or breaker isn't off. Some indoor units (Heat Pumps) have breakers right on the Air Handler itself. But also check the main breaker panel. Some units have a shutoff switch on the side of the unit or an Emergency Switch located on a wall.What can cause an AC blower motor to stop working? A number of things could cause this to happe...


  • What causes a heater fan to stop working in a car?
  • If little air is coming through the vents (hot or cold), then it could be because the blower motor for the fan or a switch or resistor that controls fan speed isn't working. Another cause might be that the electronically controlled “blend doors” that direct air flow are stuck or broken.In some cars, a failed blower motor resistor can cause a heater fan to stop working completely. In most cases, a...


  • What to do when your car blower motor is not working?
  • Check the Fuses, Relays, and Electrical Connections This is often the case. Your vehicle should have a complete relay diagram showing the location of all of the vehicle's electrical components such as fuses and relays. To fix any blower, the first things to look at are the fuses, relays, and electrical connections.If your blower motor is dirty or has a bad capacitor, you can call in an HVAC techni...


  • Can blower motor work without a resistor?
  • Without any power, the motor won't run. As a result, the blower fan stays still and silent, and no air blows out of the vents. There are instances where a bad resistor will prevent the current from reaching the blower motor altogether.If the blower motor resistor fails, the blower motor will still work, but it will be stuck on one speed in most cases. If you remove the resistor completely, the blo...


  • How long should blower motors last?
  • How often should you replace your blower motor? Blower motors that are clogged with debris, or that become saturated with moisture can fail due to overworking or electrical shorts. Something to consider when replacing the blower motor in your HVAC system is how often you are paying for repairs. Most residential furnaces should last between fifteen and twenty years. What are the signs of a blower m...


  • What does the blower motor resistor control?
  • The blower motor resistor is responsible for controlling the blower motor speed. In the past, this was done by varying the voltage supplied to the blower motor. In newer applications, the blower motor resistor is actually a solid state module that sends a varied signal to the blower motor.What happens when a blower motor resistor fails? If the resistor shorts or fails, it may cause the blower moto...


Comments

Leave a Comment

<
Email us