• Home
  • Where is the blower motor control module located?

Where is the blower motor control module located?

Author of the blog (work in a car repair shop)
Ask Q

Where is the blower motor control module located?

It's located inside the dash, often on the opposite side of the steering wheel or inside the engine compartment on the firewall. A blower motor resistor or a blower motor control module is the part that controls the speed of the blower motor.It's located inside the dash, often on the opposite side of the steering wheel or inside the engine compartment on the firewall. A blower motor resistor or a blower motor control module is the part that controls the speed of the blower motor. How the speed of the blower motor is controlled.

Is there a fuse that controls the blower motor?

Many vehicles have two fuses for the blower motor, one in the interior fuse block and the other under the hood. The blower motor is usually under the dashboard on the passenger side.

How do I know if it's my blower motor or resistor?

Typically, if the fan will work on some speeds but not on others, the resistor is suspect. Okay, let's say there's no melting going on, but your fan doesn't work on all speeds. Typically, if the fan will work on some speeds but not on others, the resistor is suspect.

Where is the blower motor fuse and relay?

Under the instrument panel, look under the glove box. On the right side of the fender wall you will find another fuse box. The blower motor fuse is easy to replace.

What relay controls the blower motor?

The blower motor relay controls the current used to power the blower motor, and is subject to the constant on and off switching.

Where is the blower motor relay?

The blower motor relay is generally located in the under-hood fuse box or in the under-dash fuse box. A blown fuse can mimic relay failure. A failed blower motor switch can also give many of the same symptoms.

What can cause a blower motor to stop working?

In most cases, a blower motor resistor fails due to corrosion or overheating. Sometimes, the mechanical resistance to the motor rotation causes an excessive electric current that can overheat and prematurely damage the blower motor resistor.

Where is the blower motor reset button?

Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.

How do you reset a blower motor switch?

Examine the exposed components in the furnace cabinet to locate the blower motor; look for a small silver box positioned toward the top of the cabinet. Mounted just above this box you should see a small round component with a raised red or white button at the center; this is the blower reset switch.

What happens if blower motor relay goes bad?

If the blower motor relay develops any sort of problem that hinders its ability to properly limit and distribute power, it may cause the blower motor fuse to blow. Any sort of electrical spikes or excessive current from a bad relay will blow the fuse and cut power in order to protect the system.

What happens when blower motor resistor goes out?

If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed. The heating and air conditioning systems may still function at one speed, however the resistor will have to be replaced in order for full functionality to be restored.

What happens when a blower motor relay goes bad?

If the blower motor relay develops any sort of problem that hinders its ability to properly limit and distribute power, it may cause the blower motor fuse to blow. Any sort of electrical spikes or excessive current from a bad relay will blow the fuse and cut power in order to protect the system.

Where is the blower fan resistor located?

The blower motor resistor is usually extremely easy to access, but the hard part can be positioning your body inside the car to remove the part. The resistor is at the bottom of the HVAC housing or just behind the glove compartment.

Does a blower motor have a relay?

In a blower motor, the relay supplies the power that allows the fans to circulate warmed air. Essentially an on/off switch, the blower motor relay's reactions start and end the heating process in HVAC systems by controlling the flow of current between the power source and the motor.

What causes heater blower not working?

If little air is coming through the vents (hot or cold), then it could be because the blower motor for the fan or a switch or resistor that controls fan speed isn't working. Another cause might be that the electronically controlled “blend doors” that direct air flow are stuck or broken.

How do you test a blower motor relay switch?

Connect a test light or multimeter to the ground (black lead). Turn the ignition key to the on position (engine off), and remove the relay. Using the probe, test all terminal sockets in the relay connector. Two of the four should have power.

What controls the blower motor on the furnace?

A fan limit switch is a component of a furnace system that determines when the furnace blower assembly for hot air turns on and off. Essentially, this means that it determines when the hot air should be blown through your ventilation system. The fan limit switch also has two other functions.

How can I tell if a relay is bad?

You want to feel and listen for any clicks. If you feel and hear clicks, the relay works on one side – the side with the energizing circuit and coil. However, if there was no sound from the horn, the relay has a problem along the contact circuit.

Where is the blower motor capacitor?

It's common for HVAC blower unit fan motors to use a start/run capacitor. Those will be located in the blower cabinet, often right on the blower motor itself.

How much does it cost to replace a blower motor relay?

The blower motor is operated by an electrically operated switch, called a relay. If the relay fails, the motor's fans will not blow conditioned air into your car. Fixing the relay usually costs around $50 to $80. So, if the blower motor relay fails, you could be left sweating or shivering.

Why is my blower not working on my AC unit?

In air conditioning mode, check the indoor unit for ice around the evaporator coil and refrigerant lines. If the fan is not working, the coil could freeze. With a frozen coil, air will not pass through until the ice melts. You should shut off the air conditioning immediately.

Why is my thermostat not turning the heat on?

Check Your Thermostat If your heating system will not turn on, the first thing you should do is check the thermostat. The thermostat's battery may have gone bad, causing it to power off. If your thermostat is hardwired, a power surge, brownout, or brief power outage may have caused the thermostat to lose its settings.

Where is the blower motor relay?

The blower motor relay is generally located in the under-hood fuse box or in the under-dash fuse box. A blown fuse can mimic relay failure. A failed blower motor switch can also give many of the same symptoms.

How much does it cost to replace a blower motor relay?

The blower motor is operated by an electrically operated switch, called a relay. If the relay fails, the motor's fans will not blow conditioned air into your car. Fixing the relay usually costs around $50 to $80. So, if the blower motor relay fails, you could be left sweating or shivering.

Where is the blower fan resistor located?

The blower motor resistor is usually extremely easy to access, but the hard part can be positioning your body inside the car to remove the part. The resistor is at the bottom of the HVAC housing or just behind the glove compartment.

Can a bad blower motor resistor cause no AC?

No Air Coming From Vents The blower motor resistor controls the power to the system's blower motor. When it fails, it can cut off all power to the motor.

What is a blower control module used for?

Basics Of Troubleshooting The Blower Control Module. The blower control module is a solid state device unlike the old style blower motor resistors that actually use resistors. It controls blower motor speed by varying the voltage it sends to the blower motor.

Where is the blower motor resistor located?

Blower motor resistor. It's located inside the dash, often on the opposite side of the steering wheel or inside the engine compartment on the firewall. In most modern cars, the speed of the blower motor can be adjusted gradually. The electronic module that controls the speed of the blower motor is called a blower motor control module.

What part controls the speed of the blower motor?

A blower motor resistor or a blower motor control module is the part that controls the speed of the blower motor. How the speed of the blower motor is controlled. See also:

What happens when the blower control module fails?

In most cases when a blower control module fails, the blower motor doesn't work at all. In some cars (e.g., older GM trucks), a failed blower control module or processor can cause the blower motor to continue running even with the ignition OFF.

Below you will find two interesting articles on a similar topic 👇

How do I know if I have blower motor or resistor?

What happens if you have a bad blower motor resistor?

Tired of looking for a video for your question?

Video Answer below 👇

Were our answers helpful?

Yes No

Thanks so much for your feedback!

Have more questions? Submit a request

FAQ for the last Day

  • How long does a furnace usually last?
  • Can furnaces last 30 years? An average furnace is designed to operate for 15 to 30 years in a home. The easiest way to increase the life cycle of your furnace is to hire a certified technician to perform maintenance and repairs once a year. How often should a furnace be changed? Which furnace lasts the longest? Can furnaces last 30 years? An average furnace is designed to operate for 15 to 30 ye...


  • How much does it cost to replace a furnace blower motor?
  • On average nationwide, a furnace blower motor replacement costs $400 to $600, including parts and labor. A single-speed blower motor costs around $450 to replace while a variable-speed motor costs $600 or more. You'll also need to budget labor, about $75 to $125 per hour.How long does it take to replace a furnace blower motor? It takes between 45 to 90 minutes for a HVAC specialist to: replace the...


  • Why is my furnace not starting?
  • If your furnace is not turning on you should first check if the filter is clean. Dirty filters cause insufficient airflow and can prevent the furnace from starting. Other reasons it won't start can stem from improper thermostat settings, forgetting to turn on the gas line, or faulty pilot light.One of the most common reasons a furnace is not igniting is when the line in which the furnace draws its...


  • How long does it take to install a new heating system?
  • 4-8 hours. Furnace installation in a residential home usually takes 4-8 hours, depending on the complexity of the job. Additional time may need to be added to account for ductwork, electrical, or gas line modifications to properly match the new equipment.How long does central heating take to install? It typically takes between 1 and 5 days to install a new central heating system. How long does it...


  • How much does it cost to replace a heating element?
  • For the cost of parts and labor, you should budget at least $170 to $280 for a new heating element. An appliance technician typically charges between $80 and $100 per hour for labor. This cost also includes a one-time service fee.Is it worth replacing a heating element in a dryer? If your dryer's heating element burns out more than once within a year or two, the thermal fuse, which is supposed to...


  • Does car need to be running for heater to work?
  • A: Yes, but indirectly. Gas is required to run the engine which produces heat. Using the heater does not affect fuel efficiency as opposed to the air conditioner, as the heated outdoor air is simply being redirected and moved into the cabin. Q: Why Is My Car Heater Not Getting Warm?Does car have to be started for heat? The answer is almost always no. Thanks to the way modern cars are built, it's n...


  • How much does it cost to replace a water heater?
  • How much does a 40 gal water heater cost? The national average cost range to install a 40-gallon tank water heater is $850 to $2,600, with most people paying around $1,400 for a 40-gallon gas tank water heater that is a direct replacement for an existing model. What is the life expectancy of a water heater? How Long Do Water Heaters Last. — The majority of water heaters last between eight and ten...


  • How does a car heater blower work?
  • The heater has an inlet and outlet which allows coolant to flow through the core. The blower motor will blow air through the heater core and to the passenger compartment inside your car. The heater control valve is a device that controls the flow of the hot engine coolant through the heater core.How does a car blower work? The blower motor is the fan that pushes heated or cooled air through dashbo...


Comments

Leave a Comment

how
Email us