The blower motor resistor is usually extremely easy to access, but the hard part can be positioning your body inside the car to remove the part. The resistor is at the bottom of the HVAC housing or just behind the glove compartment.
Where is a blower motor resistor located?
The heater blower motor resistor is often found beneath the dashboard. It is located in the heater and air conditioning compartment. It's connected to the air conditioning system, where it can adjust the speed of the blower motor fan.
What are the signs of a failing blower motor resistor?
Signs of a Bad Blower Motor Resistor Loss of HVAC fan control (total or certain speeds) The fan only works on its highest speed setting. No air coming from vents. Intermittent or inconsistent fan speed.
What happens when the blower motor resistor goes out?
If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed. The heating and air conditioning systems may still function at one speed, however the resistor will have to be replaced in order for full functionality to be restored.
Where is a blower motor resistor located?
The heater blower motor resistor is often found beneath the dashboard. It is located in the heater and air conditioning compartment. It's connected to the air conditioning system, where it can adjust the speed of the blower motor fan.
Is it easy to replace a blower motor resistor?
How to Replace a Blower Motor Resistor. The blower motor resistor is usually extremely easy to access, but the hard part can be positioning your body inside the car to remove the part. The resistor is at the bottom of the HVAC housing or just behind the glove compartment.
How much does it cost to replace a blower resistor?
How much does a blower motor resistor cost? To replace the blower motor resistor, it would cost you anywhere between $50 to$150 – this includes the cost of equipment and labor. However, by doing it yourself at home, you can save up to $70.
Is there a fuse for blower motor?
What happens if blower motor relay goes bad?
If the blower motor relay develops any sort of problem that hinders its ability to properly limit and distribute power, it may cause the blower motor fuse to blow. Any sort of electrical spikes or excessive current from a bad relay will blow the fuse and cut power in order to protect the system.
Can a bad blower motor cause no heat?
Problems with Your Blower Motor or Blower Motor Resistor Without it, there's no circulation of air—hot, cold, or otherwise. The blower motor resistor is the part that controls the fan speed of the blower motor. Both of these components can fail, resulting in the heating system simply not working.
Will a blower motor work without the resistor?
Without any power, the motor won't run. As a result, the blower fan stays still and silent, and no air blows out of the vents. There are instances where a bad resistor will prevent the current from reaching the blower motor altogether.
How do you remove and replace a blower motor resistor?
Locate the blower motor resistor on the passenger side under the dash board. It is mounted to the the blower housing near the blower motor. Disconnect the electrical connector to the blower motor resistor. Remove the screws or bolts to the blower motor resistor and remove the resistor.
Where is a blower motor located?
The blower motor is usually under the dashboard on the passenger side. Blower motors that make loud squeaks or rattling noises may be worn out and on the verge of packing it in, but sometimes those noises are caused by leaves or other debris that can be cleaned out after the motor is removed from the vehicle.
How do I test a blower motor resistor?
Place one lead of the Ohmmeter on terminal 1 of the resistor. Place the other lead on terminal 2 and check against specifications. If this circuit is open, showing infinity on the Ohmmeter, the blower resistor must be replaced. Move the lead from terminal 2 to terminal 3 and check this reading against specifications.
Where is a blower motor resistor located?
The heater blower motor resistor is often found beneath the dashboard. It is located in the heater and air conditioning compartment. It's connected to the air conditioning system, where it can adjust the speed of the blower motor fan.
Should I replace the blower motor and resistor at same time?
We do suggest that you replace the resistor at the same time. It may not be critical, but this will keep the system more uniform. The issue may even be related to the resistor. If you know that it is not related to the issue, then you do not have to replace it.
Where is a blower motor located?
The blower motor is usually under the dashboard on the passenger side. Blower motors that make loud squeaks or rattling noises may be worn out and on the verge of packing it in, but sometimes those noises are caused by leaves or other debris that can be cleaned out after the motor is removed from the vehicle.
Will a blower motor work without the resistor?
Without any power, the motor won't run. As a result, the blower fan stays still and silent, and no air blows out of the vents. There are instances where a bad resistor will prevent the current from reaching the blower motor altogether.
How long does it take to replace a blower motor in a car?
How Long Does It Take To Replace A Blower Motor In A Car? It generally takes about 4 hours for an experienced technician to do a blower motor replacement. If you are doing it on your own in your garage with common tools, you can expect the job to take 6 hours or more.
Where is the blower motor relay fuse located?
Under the instrument panel, look under the glove box. On the right side of the fender wall you will find another fuse box. The blower motor fuse is easy to replace.
What can cause a blower motor to stop working?
In most cases, a blower motor resistor fails due to corrosion or overheating. Sometimes, the mechanical resistance to the motor rotation causes an excessive electric current that can overheat and prematurely damage the blower motor resistor.
Why is my car blowing out cold air when the heat is on?
Low Coolant Level The coolant (usually a mixture of water and antifreeze) in your engine doesn't just work to keep the engine from overheating: It's also the source of heat supporting the heating system. If there isn't enough coolant in your system, the heater core will blow cold air into your car.
What is the difference between blower motor and blower motor resistor?
The blower motor resistor is responsible for controlling the blower motor speed. In the past, this was done by varying the voltage supplied to the blower motor. In newer applications, the blower motor resistor is actually a solid state module that sends a varied signal to the blower motor.
How do you know if a resistor is bad?
A good resistor should test within its rated range. A bad resistor will either show infinite resistance or a measurement far higher than its rated resistance. In either case the resistor is no longer functioning properly.
Is there a fuse for blower motor?
Should I replace the blower motor and resistor at same time?
We do suggest that you replace the resistor at the same time. It may not be critical, but this will keep the system more uniform. The issue may even be related to the resistor. If you know that it is not related to the issue, then you do not have to replace it.
Where is the blower motor resistor located?
Blower motor resistor. It's located inside the dash, often on the opposite side of the steering wheel or inside the engine compartment on the firewall. In most modern cars, the speed of the blower motor can be adjusted gradually. The electronic module that controls the speed of the blower motor is called a blower motor control module.
Can you drive a car with a blower motor resistor?
You can still drive your car despite a faulty blower motor resistor. However, you’ll probably find it uncomfortable to have the blower running at one speed setting the entire time or having limited access to certain settings. Depending on the manufacturer and model, a blower motor resistor can go anywhere between $3 and $335 on CarParts.com.
What are the different parts of a blower motor?
The blower motor wiring system includes several components such as fuses, resistor module and, at times, a relay. Most blowers mount under the dashboard and on the passenger side. Some vehicles have the component installed in the engine compartment, on the fender.
How to test a blower motor resistor fuse?
Test the blower motor resistor fuse Once the blower motor resistor fuse is located, the next step is to test if it's working properly. To do so, use a 12 Volt test light and connect it from one side to the ground and the other side to the fuse terminal. Monitor the behavior of the power on the terminals and see if the fuse is working properly.
Below you will find two interesting articles on a similar topic 👇
How much does it cost to replace a car blower motor?Where is the blower located in the AC unit?
