Why does my blower motor keep burning out?

Buildup of dust, dirt, or debris. Electrical problems, including an excessive voltage supply. Motor insulation failing prematurely due to high temperatures. A weak blower capacitor.Causes of blower fan burnout include: Windings that have deteriorated. Bearings that have seized after running out of oil.

Why does my blower motor keep failing?

Blower motor breakdown can be the result of anything from old age to failed bearings, high amp draw, electrical failure in the windings, dirt accumulation, and more. “The most common cause is dirt accumulation due to lack of maintenance,” said Tom Beaulieu, president of Bay Area Services Inc.

Why does my blower motor resistor keep burning up?

In most cases, a blower motor resistor fails due to corrosion or overheating. Sometimes, the mechanical resistance to the motor rotation causes an excessive electric current that can overheat and prematurely damage the blower motor resistor.

How long should a blower motor last?

What causes a blower to go out?

Blower motors go bad due to one of a few reasons: Overheating from airflow restriction. Bad bearings. Damaged fan blade/scraping sides.

How do I know if it's my blower motor or resistor?

Typically, if the fan will work on some speeds but not on others, the resistor is suspect. Okay, let's say there's no melting going on, but your fan doesn't work on all speeds. Typically, if the fan will work on some speeds but not on others, the resistor is suspect.

How do you know when your blower motor resistor is bad?

Signs of a Bad Blower Motor Resistor Loss of HVAC fan control (total or certain speeds) The fan only works on its highest speed setting. No air coming from vents. Intermittent or inconsistent fan speed.

How long should a blower motor resistor last?

The blower motor resistor is designed to last for the car's lifespan. In most cases, these resistors will wear out long before the car does. Usually, the wear that the blower motor resistor has is due to the constant use that it gets and the heat that it is exposed on a regular basis.

Can you fix a blower motor resistor?

The average cost to replace the blower motor resistor at a repair shop is between $44 and $55 in parts and $70 in labor costs, for a total cost of around $114 to $125. On the other hand, you can easily fix the blower motor resistor at home in about an hour (even if you're a beginner) and for around $70.

How much should it cost to replace a blower motor?

Replacing a blower motor costs $450 on average with a typical range of $250 to $800. With a warranty, you might pay as little as $150 for labor alone. For high-end models, like those with large motors or access issues, you might pay as much as $2,000.

Do blower motors get weak?

Similar to other components in an HVAC system, the blower motor will become more vulnerable to mechanical failures as it experiences more wear and tear over time. If your air conditioner is aging and becoming increasingly problematic, there's a good chance the motor is in trouble.

Can you drive without a blower motor?

Your car's blower motor is not only necessary for the operation of your air conditioner. Without a functioning blower motor your engine runs the risk of overheating.

Why does my car blower only work sometimes?

When a blower resistor fails, the highest fan speed usually is the only one that still works because it essentially bypasses the resistor and receives the maximum amount of voltage. When the resistor is working, it reduces the amount of voltage going to the lower fan speeds so the fan runs slower.

Why do ECM blower motors fail?

A major cause of failure occurs when a blower is applied to an application with static pressure above . 8” WG. This not only shortens the life of an ECM, but also a PSC. With an ECM this will cause a failure of the metal oxide varistor (MOV), a disk in the controller.

Why AC blower stops working after a while?

One of the most common reasons fans stop spinning is because of a dead capacitor. The AC's capacitors are small, cylinder components that send energy signals to power the fan motor and the rest of the AC unit.

What happens when blower resistor goes bad?

If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed. The heating and air conditioning systems may still function at one speed, however the resistor will have to be replaced in order for full functionality to be restored.

Is there a fuse for the blower motor?

How much does it cost to replace a blower motor resistor?

How much does a blower motor resistor cost? To replace the blower motor resistor, it would cost you anywhere between $50 to$150 – this includes the cost of equipment and labor. However, by doing it yourself at home, you can save up to $70.

How do you test a blower motor relay?

Connect a test light or multimeter to the ground (black lead). Turn the ignition key to the on position (engine off), and remove the relay. Using the probe, test all terminal sockets in the relay connector. Two of the four should have power.

Should I replace the blower motor and resistor at same time?

We do suggest that you replace the resistor at the same time. It may not be critical, but this will keep the system more uniform. The issue may even be related to the resistor. If you know that it is not related to the issue, then you do not have to replace it.

Where is the resistor located in blower motor?

The heater blower motor resistor is often found beneath the dashboard. It is located in the heater and air conditioning compartment. It's connected to the air conditioning system, where it can adjust the speed of the blower motor fan. It can also be found behind the glove box of some vehicles.

Are all blower motor resistors the same?

Blower motor resistors have several resistors with different resistances.

How long does it take to replace a blower motor in a car?

How Long Does It Take To Replace A Blower Motor In A Car? It generally takes about 4 hours for an experienced technician to do a blower motor replacement. If you are doing it on your own in your garage with common tools, you can expect the job to take 6 hours or more.

Can I upgrade my blower motor?

Yes, you can place a bigger blower motor in your furnace. However, you will need to check the user's guide for your furnace to see its limitations as far as voltage, horsepower, and amp usage.

Can a bad blower motor cause overheating?

As you may know, the heater not working in some cases may be related to the overheating problem you are also having. This may be due to a faulty heater blower motor or potentially a bad heater core.

What does blower motor reset button look like?

They are generally red or yellow and are located inside the blower compartment. The reset button is a safety feature that will shut down the furnace when a problem is detected, often a hot or overheating furnace, before it trips the circuit breaker.

What causes a blower fan to overheat?

I can think of four possible causes: 1. The blower capacitor is weak causing the motor to overheat (a good tech would usually replace both the motor and the capacitor after a motor failure). 2. The motor is undersized. The HP and RPM of the motor must match the fan.

Why does my blower motor keep running when I turn it off?

If your car uses a blower motor controller, it can keep running the blower motor after you shut down the engine. Those used to be installed only on vehicles with automatic climate control with variable speed fans, but now they’re installed on many late model vehicles.

Why won’t my air conditioner blower work?

Lots of times, airflow restriction from a dirty filter will cause a blower motor to overheat. The excess heat in the motor will cause its performance to degrade, and the motor may fail altogether. If your blower has a fan belt, take a loot at it. If the belt is snapped, then the blower won’t work. Replacing the belt is a fairly simple fix.

What causes a blower motor resistor to fail?

Blower motor resistor failure is most commonly shown when the heater fan only operates at the highest speed setting (4 or 5) and does not operate at lower speeds. Is it also intended for the blower motor resistor to become hot during operation?